myQA® Machines

Dosimetry Plug-In

• Analysis of main axis and diagonals (field size, symmetry, flatness, centre, penumbra, light field)
• Acquire all key beam parameters in just one shot (dose output, profile analysis, energy verification)
• Perform automated dosimetry tests with the StarTrack*, MatriXX or Dolphin detectors

MLC QA Plug-In

• Every pixel of every strip is fitted to a modified Lorentzian or Gaussian curve
• Identifies whether any leaf is not in tolerance and which leaf number failed
• EPID images & films can be analysed to determine leaf position accuracy & MLC transmission characteristics
• Perform automated MLC stripe tests ('picket fence test')

VMAT QA Plug-In

• Ensures that the changing dose rates and speeds during delivery do not adversely affect the delivered dose
• Automatic test analysis to verify accurate dose delivery using different dose rates, gantry speeds, and MLC leaf speeds
• Perform automated dynamic MLC QA and VMAT QA

EPID QA Plug-In

• Compatible with all common imaging phantoms
• Fully automatic with all calculations performed in 5 seconds or less
• Perform automated imaging QA for planar imaging (kV and MV)

CBCT QA

• Compatible with all common imaging phantoms
• Perform automated imaging QA for CT and CBCT, including contrast, contrast to noise ratio, uniformity, HU deviation, spatial resolution, imaging scaling, and more!

Isocentre Check - Winston Lutz

• Supports most Winston-Lutz phantoms
• Supports circular (SRS cones) or rectangular fields (MLC)
• 3D offset calculations
• Offsets between radiation field & phantom centres
• Automated isocentre tests (also known as 'Winston-Lutz test') based on EPID or film images

Generic Tests

Integrate any of your specific tests

• Easily compose any test you need to check and document
• Examples: Make sure you check the temperature of your medicine fridge, check your room lighting or security locks…
• Your individual QA checks and any other tests easily integrated with the customisable generic tests’ functionality

myQA FastTrack

Measurement Application for StarTrack* and MatriXX

• Profile comparison
• Import and export of measurements (ASCII)
• Allows the Linac technician to quickly setup unscheduled tests
• Instant display of results and real-time analysis (e.g. for beam steering, start-up behaviour)